USED Fender Japan / TL52-80 VNT [05]

Fender Japan's TL52-80TX is now in stock.

This model was produced based on the 1952 Telecaster.
It is made of ash body and maple neck/fingerboard, which is the royal road of 50s wood material, and negative screws are used for fixing parts.
The specifications of this model are strongly based on the original Telecaster.
Texas Special pickups are mounted.

There are scratches, dents, and other overall strong signs of use, but it has been checked and overall adjusted by a professional repair person after arrival, and is in good playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: Q045641
Year of manufacture: 2002-2004
Country of manufacture: Japan
Case: Original soft case
Weight: 3.41kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 23.3mm
Neck thickness near 12th fret: 25.8mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modification: Selector switch jack
Repair and maintenance: selector switch replacement, jack replacement, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
Q045641

Year of manufacture
2002-2004

Country of manufacture
Japan

Case
Genuine soft case

Weight
3.41kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.6mm

Neck thickness near 1st fret
23.3mm

Neck thickness near 12th fret
25.8mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Modification
Selector switch and jack

Repair and maintenance parts
Selector switch replacement, jack replacement, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment