USED FENDER JAPAN / ST68-85TX 1997-2000 Vintage White [06]

ST68-85TX with large head/4-point fastening joint is in stock!
From the serial, this Strat was made between 1997-2000, with an alder body and Texas Special pickups.
There is a dent near the 2nd fret on the 6th string side of the neck and numerous dings on the back of the neck. There are also paint cracks on both sides of the neck pocket.
The instrument is in overall condition and is in good to fair condition.
The Vol and Tone controls are a little heavy, but there is no buzzing or other symptoms.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: O 005020
Country of manufacture: Japan
Case: Soft case
Accessories: Arm, Wrench
Weight: 3.65kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.1mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 24.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modification: Strap pins
Repair and maintenance: Fret adjustment, strap pin replacement, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
O 005020

Country of manufacture
Japan

Case
Soft case

Accessories
Arm, Wrench

Weight
3.65kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Leftover frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.1mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
24.2mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Modified part
Strap pin

Repair and Maintenance
Fret adjustment, strap pin replacement, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment