USED Gibson Memphis / Historic Series 1963 ES-335 TDC Sixties Cherry [3.59kg/2014 - shipped 2015]

ES-335 model with 1963 style VOS finish.

This is a Historic Series 1963 ES-335, made by Gibson Memphis Factory, 2014 (shipped in 2015). This '63 ES-335 features a thin neck with a low volume center block, block position marks, silver metal insert knobs, and double-ring pegs; the PU is an MHS Humbucker with a nylon saddle non-wire ABR bridge with nylon saddle non-wire ABR bridge.

This model has a center block with a large wiring space, nylon saddles, and a versatile sound-bluesy, dead nuanced tone.

It shows signs of use (scratch marks on the outer edge, paint peeling off the binding, scuffs and playing scratches, picking marks, fogging/bitzing of metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment) upon arrival, and the fret board is high enough for playing.

* The truss rod has been checked to about 50° on the tightening side and is in good condition.
* This is a used item, and there are scratches, dents, etc. from use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: 42453
Year of manufacture: 2014
Country of manufacture: USA
Case: Hard Case
Accessories: Certificate of Authenticity
Weight: 3.59kg
Truss Rod: Approx. 50° remaining on the tightening side
Fretboard: No problem, sufficient fretboard height
Nut width: 43.4mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 25.4mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
42453

Year of manufacture
2014

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Certificate of Authenticity

Weight
3.59kg

Truss Rod
Approx. 50° remaining on tightening side

Fret remaining
No problem, sufficient fret height

Nut width
43.4mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
25.4mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment