商品情報にスキップ
1 16

USED Gibson / 1970s SG Standard Mod Cherry [11]

Serial Number : 966353

[SN 966353] USED Gibson / 1970s SG Standard Mod Cherry [11]

Item Code: 11-2800002626332
Condition: USED
Store: [11] umeda

通常価格 ¥336,600 JPY
通常価格 セール価格 ¥336,600 JPY
セール 売り切れ
配送料はチェックアウト時に計算されます。
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
inquery
inquery
QQ: 3784816402
For customers residing in Japan
Vintage Gibson SG Standard from the 1970s is in stock!
The body is a thin 3-piece mahogany body with a beveled contour for ease of playability, a 3-piece mahogany neck with a bolute near the back of the nut for strength and Made In USA engraving on the back of the head, and a rosewood fretboard with a brilliantly even grain.
The neck is made of mahogany with Made In USA engraving on the back of the head, and the fingerboard is made of rosewood.

There is a neck break at the neck joint that has been repaired. It has been touched up by a specialist.
There are screw holes where the large pickguard was changed. The holes have been repaired.
Rear pickup date is 498 181 and is not genuine as it was made in 1981. Front pickup is not dated as it is only stamped numbered and has no date.
Pots are recent CTS. capacitors are ceramic capacitors and are believed to be original.
The pegs have been replaced and the holes have been filled in. Pegs, knobs, bridge, etc. are original parts.
There is a crack on the back panel near the screw hole.
Overall, there are scratches, dents, and rust on the metal.
The neck is slightly twisted, but there are no problems with the playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 966353
Year of production: 1972-75
Country of manufacture: USA
Case: Hard Case
Weight: 3.03kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.0mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 26.3mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
966353

Year of manufacture
1972-75

Country of manufacture
U.S.A.

Case
Hard Case

Weight
3.03kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
40.0mm

Neck thickness near 1st fret
21.4mm

Neck thickness near 12th fret
26.3mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
1970年代のヴィンテージGibson SG Standardが入荷!
弾きやすさ求めたベヴェルドコンターが施された薄い3Pのマホガニーボディ、3P仕様にてナット裏付近には強度を上げるためのボリュート、ヘッド裏にはMade In USA刻印が刻まれたマホガニーネック、鮮やかと言えるほど揃った木目のローズウッド指板の構成。
太く粘るようなローミッドサウンドと、SG特有のエッジ感によりレスポンスの良い深みのあるヴィンテージサウンドを提供します。

ネックジョイント部にネック折れ修正あり。専門業者によりタッチアップされています。
ラージピックガードに変更されていたネジ穴跡あり。穴埋め修正しています。
リアピックアップデイトは498 181で1981年製のため、純正ではありません。フロントピックアップは刻印ナンバードのみでデイト無しのため、年代不明。
ポットは近年のCTS。コンデンサーはセラミックコンデンサでオリジナルと思われます。
ペグ交換されていたあとを穴埋めしています。ペグ、ツマミ、ブリッジなどはオリジナルパーツ。
バックパネルのビス穴付近にクラックあり。
全体的に傷や打痕、金属の錆があり、使用感があります。
ネックに若干捩れがありますが演奏コンディション問題ありません。

商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: 966353
製造年: 1972-75
製造国: アメリカ
ケース: ハードケース
重量: 3.03kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 注意点ありまだ切削に耐えるがフレット低め
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 40.0mm
ネック厚1フレット付近: 21.4mm
ネック厚12フレット付近: 26.3mm
スケール: 628mm (24.75")
RADIUS: 305mm (12")
セットアップ時の弦: ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

specs

商品ランク
B+:多少傷はあるが通常使用する用途において問題なし

12ヶ月

シリアルナンバー
966353

製造年
1972-75

製造国
アメリカ

ケース
ハードケース

重量
3.03kg

トラスロッド
問題なしロッド左右60度まで確認済みにて問題なし

フレット残り
注意点ありまだ切削に耐えるがフレット低め

弦高低音弦側
12フレット上 2.0mm

弦高高音弦側
12フレット上 1.5mm

ナット幅
40.0mm

ネック厚1フレット付近
21.4mm

ネック厚12フレット付近
26.3mm

スケール
628mm (24.75")

RADIUS
305mm (12")

セットアップ時の弦
ERNIE BALL 2221 / .010-.046 set

リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

Payment and Shiping

Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.

Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.

詳細を表示する

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 4