USED Caparison / HORUS-WB-FX Transparent Charcoal Black [11]

Caparison "HORUS-WB-FX" is now in stock!
This is the "FX" (fixed bridge) model of the Horus model featuring 628mm scale and 27 frets.
Walnut top/Australian blackwood back body, maple & walnut 5-piece neck, ebony fingerboard.

Stainless steel jumbo frets are used to achieve a tight and clear response with excellent tone rise.

The bridge is equipped with Caparison's original "Fixed Bridge 6".
The bridge is equipped with Caparison's original "Fixed Bridge 6," which allows for a wide range of tuning options, from down-tuning with heavy gauge to standard tuning with regular gauge, making it possible to set up the instrument for practical use.
In addition, the Gotoh MG-T locking tuners and Graph-Tech Black TUSQ nuts ensure high tuning stability.

The pickups are the high-output "PH-R" and the "SH-27FC," specially designed for 27-fret setups.
The simple control system with minimal master volume and selector allows for quick operation and direct sound creation.

This is one of the most practical instruments in the Horus series that can be used for a wide range of applications, from modern metal to technical lead work.
There are some minor scratches and dents.
It is in relatively clean condition with no major damage.
There is a hole for a strap pin near the neck joint, which has been filled in and hidden.
There is no noticeable abnormality in the neck, and there are no problems with the playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 3360074
Country of manufacture: Japan
Case: Original gig case
Weight: 3.18kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 1.6mm above 12th fret
String height on treble string side: 1.4mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 21.8mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, nut adjustment, saddle groove correction

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.