{"product_id":"11-2800005660449","title":"[SN B16933] USED Kramer \/ EK-1BF Mod [11]","description":"A Japanese-made Kramer EK-1BF manufactured by ESP around the late 1980s.\u003cbr\u003e \nFeaturing an alder body, maple neck, and rosewood fingerboard with 22 frets, it is characterized by the sharp silhouette typical of 1980s Kramer guitars.\u003cbr\u003e \nThe bridge is equipped with a Takeuchi-manufactured, Floyd Rose-licensed tremolo system; the blocks are stamped “Takeuchi,” and the baseplate bears the inscription “Mfg. Under Floyd Rose Pats.” Based on these specifications, the tremolo appears to be an early-model Takeuchi TRT-1 series unit.\u003cbr\u003e\n\u003cbr\u003e \nThe pickups have been replaced; the front features a DiMarzio DP181-W Fast Track 1, and the rear features a DP102 X2N. This combination of a single-coil-sized humbucker and a high-output humbucker allows for coil tapping on both pickups via the push\/pull function of the volume knob.\u003cbr\u003e \nThe tremolo arm is missing.\u003cbr\u003e \nThere is a crack at the neck joint on the 6th string side.\u003cbr\u003e \nThere is a deep dent near the controls. Dents accompanied by paint cracks can be seen across the entire body.\u003cbr\u003e \nIn addition, there are numerous scratches and dents, and the guitar shows some signs of wear.\u003cbr\u003e \nThere are no noticeable issues with the neck, and it is in good playing condition.\u003cbr\u003e \nCondition Grade: B+: Some scratches, but no issues for normal use\u003cbr\u003e\n\u003cbr\u003e \nSerial Number: B16933\u003cbr\u003e \nCountry of Manufacture: Japan\u003cbr\u003e \nCase: Non-original soft case\u003cbr\u003e \nAccessories: * Tonearm missing\u003cbr\u003e \nWeight: 3.62 kg\u003cbr\u003e \nTruss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems\u003cbr\u003e \nRemaining Fret Life: Within normal range; fret height is sufficient for playing\u003cbr\u003e \nString Height (Low String Side): 2.0 mm at the 12th fret\u003cbr\u003e \nString action (treble side): 1.5 mm at the 12th fret\u003cbr\u003e \nNut width: 42.2 mm\u003cbr\u003e \nNeck thickness near the 1st fret: 19.9 mm\u003cbr\u003e \nNeck thickness near the 12th fret: 23.5 mm\u003cbr\u003e \nScale: 648 mm (25.5\")\u003cbr\u003e \nRADIUS: 305 mm (12\")\u003cbr\u003e \nStrings at Setup: D'Addario EXL120 \/ .009-.042 set\u003cbr\u003e \nRepairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, strap pin replacement\u003cbr\u003e\n\u003cbr\u003e \n* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.\u003cbr\u003e\n\u003cbr\u003e \n* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.\u003cbr\u003e \nThese measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives.\u003cbr\u003e\n\u003cbr\u003e \n* This item is a one-of-a-kind piece, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.\u003cbr\u003e \nWe sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.","brand":"KRAMER","offers":[{"title":"Default Title","offer_id":67647298306300,"sku":"11-2800005660449","price":78000.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2247\/6028\/files\/e4213e243da9497baffb3e0db8a3f167_202610047577766.jpg?v=1791191102","url":"https:\/\/intl.ishibashi.co.jp\/ja\/products\/11-2800005660449","provider":"Ishibashi Music Corporation. ","version":"1.0","type":"link"}