USED Gretsch Gretsch / G6120SSLVO Brian Setzer Nashville Vintage Orange Lacquer [20]

This is the Brian Setzer model G6120SSLVO, a lacquer finish model made in 2005.
16" wide body, 1959 style 2.75" body thickness maple body.
Neck is maple with 24.6" scale and ebony fingerboard.
Neck shape is V-shape. Bracing is the same as in '59 with trestle bracing.
Both front and rear pickups are TV Jones.
Pegs are Spurzel locking type pegs familiar from Setzer models, and Dice knobs are used for each Vol knob.
Many SSLVOs are plain, but this one has a beautiful flame top with a graininess that comes up depending on the angle you look at it.
The neck is slightly twisted, but it is currently set up at 2.0mm on the 6th string side and 1.5mm on the 1st string side, so there is no problem in playing.

There is a fret float correction, there is a sticker on the hard case that comes with the guitar, and the lock pin has been replaced.

Item rank: B+ (Good)

Year of manufacture: 2005
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： Japan
Weight ： 3.34kg
Serial ： JT05129640

Truss Rod: No problem, confirmed up to 60 degrees to the left and right (with torsion)
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.7mm
Neck thickness(near 1st fret)|20.8mm
Neck thickness(near 12th fret)|-
Scale|628mm (24.75")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenor adjustment, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.7mm

Neck Thickness (near 1st fret)
20.8mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
628mm (24.75")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut adjustment