商品情報にスキップ
1 16

USED Fender Japan Fender Japan / ST-STD Vintage White / Maple [20]

Serial Number : JD12025792

[SN JD12025792] USED Fender Japan Fender Japan / ST-STD Vintage White / Maple [20]

Item Code: 20-2800005040074
Condition: USED
Store: [20] fukuoka

通常価格 ¥68,640 JPY
通常価格 セール価格 ¥68,640 JPY
セール 売り切れ
配送料はチェックアウト時に計算されます。
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
The J-CRAFT series Fender Japan ST-STD is manufactured in Japan with high precision and solid workmanship.
The truss rod can be adjusted from the head side without removing the neck, making neck adjustment relatively easy even for beginners.
This Stratocaster is made in Japan based on many years of experience and knowledge, and can be used with confidence.

There are some parts have some chinks and minor rust, and there is a small ding on the corner of the head with a dent.
There are paint cracks on the neck and body joints, and dents on the neck under the bridge and behind the nut.
There are also some other minor scratches and dents.

After receiving the instrument, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment have been performed.

Item rank: B+ (Good)

Year of manufacture: 2012
Truss rod: There is enough room.
Fretboard : 60-70
Accessories : Soft case / Non-genuine arm
Country of Origin : Japan
Weight : 3.66kg
Serial : JD12025792

Truss Rod: No problem.
Fret Remaining: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.7mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.5mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
日本国内にて製造し精度の高い確かな作りが魅力のJ-CRAFTシリーズFender Japan ST-STD。
ネックを外さなくてもヘッド側からトラスロッドの調整が可能で初心者の方にも比較的容易にネックの調整が行えます。
日本国内製の長年の経験と知識に基づいた作りで安心して使用できるストラトキャスターです。

パーツにクスミや細かいサビがあり、ヘッド角に凹みを伴う小さな打痕がございます。
ネックとボディジョイント部に塗装亀裂があり、ブリッジ下辺りやナット裏ネックに凹みを伴う打痕がございます。
その他細かい線傷や小さな打痕等がございます。

入荷後、クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

商品ランク:B+ (良品)

製造年 : 2012年製
トラスロッド : 余裕有り
フレット : 60〜70%
付属品 : ソフトケース/非純正 アーム
生産国 : JAPAN
重量 : 3.66kg
シリアル : JD12025792

トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 問題なし充分なフレット高さあり
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 41.7mm
ネック厚1フレット付近: 20.8mm
ネック厚12フレット付近: 23.5mm
スケール: 648mm (25.5")
RADIUS: 241mm (9.5")
セットアップ時の弦: ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。
詳細を表示する

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 4