USED FENDER USA / American Standard Stratocaster 1988 [06]

This Stratocaster from the American Standard Series incorporates modern specs in a traditional style.
This Stratocaster features an alder body with rosewood fingerboard and satin-finished maple neck, two-point tremolo support, and 22 frets for playability. Controls include master volume, front tone, and center and rear TBX controls.

Arm is missing, strap pins have been replaced with shear lock pins, but the strap side is missing.
There are pickguard film marks, color burn, and ROLAND GK-2 installation marks.
There are minor dents and scratches on the body. The truss rod is tight and almost at its limit.
It has been cleaned and adjusted after arrival.

Item Rank: B+: Some scratches, but no problem for normal use.

Serial Number: E801795
Year of manufacture: 1988
Country of manufacture: USA
Case: Hard Case
Weight: 3.60kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 22.1mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
E801795

Year of manufacture
1988

Country of manufacture
U.S.A.

Case
Hard Case

Weight
3.60kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod with caution

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
22.1mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment