USED Fender Japan / MG69-65 SBL Sonic Blue (Made in Japan)[1994-95 / 3.30kg]

This is a Fender Japan Mustang MG69-65 with a pearl white pickguard conversion, made in 1994-1995.

This Mustang follows the '69 style with a short scale, compact body, elbow contour and back contour. Basswood body, maple neck, round-applied rose fingerboard, 2 x MG-SINGLE PUs, and dynamic vibrato.

Popular for its easy handling, the Mustang is also recommended for female guitarists, those with small hands, and guitarists who use a wide stretch a lot.

Pickguard has been replaced (original red tortoiseshell included), and the arm fastening screws have been changed to a finger-tightening type. The guitar shows signs of use (color fading, dents under the bridge and around the body, scratches and play marks, picking marks, small scratches on the back of the neck, fogging, pits, rust on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, the fret board is high enough to play, and the truss rod is adjustable to ±60°.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold when you order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: S004970
Year of manufacture: 1994-1995
Country of manufacture: Japan
Case: Hard Case
Accessories: Arm
Weight: 3.30kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 35.2mm
Neck thickness near 1st fret: 18.5mm
Neck thickness near 12th fret: 18.3mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
S004970

Year of manufacture
1994-1995

Country of manufacture
Japan

Case
Hard Case

Accessories
Arm

Weight
3.30kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
35.2mm

Neck thickness near 1st fret
18.5mm

Neck thickness near 12th fret
18.3mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment