{"product_id":"08-2800005723120","title":"[SN JD25008955] USED Fender \/ Made in Japan Traditional II '70s Mustang Matching Head Candy Apple Red [3.14 kg \/ Manufactured in 2025] Fender [08]","description":"The Fender Made in Japan Traditional '70s Mustang is a Japanese-made Mustang that follows the specifications of the classic '69 model.\u003cbr\u003e\n\u003cbr\u003e \nIt features a basswood body, a maple neck with a rosewood fingerboard, 22 frets, and controls consisting of 1 volume, 1 tone, and on\/off switches for each pickup. By setting the on\/off switches for each pickup to the opposite side, you can also produce a phase-out (out-of-phase) sound.\u003cbr\u003e\n\u003cbr\u003e \nThis model is appealing for its playability, featuring a nut width of approximately 40.0 mm and a 610 mm (24\") short scale.\u003cbr\u003e\n\u003cbr\u003e \nAlthough there are some signs of use (minor scratches, scuffs, wear marks, wipe marks, picking marks, etc.), it is in good condition.\u003cbr\u003e\n\u003cbr\u003e \nIt was fully set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, and nut groove correction). The frets are at a height suitable for playing, and the truss rod can be adjusted in both directions (tightening and loosening); it has been tested to operate up to ±60° with no issues.\u003cbr\u003e\n\u003cbr\u003e \nCondition Grade: B+: Some minor scratches, but no issues for normal use\u003cbr\u003e\n\u003cbr\u003e \nSerial Number: JD25008955\u003cbr\u003e \nYear of Manufacture: 2025\u003cbr\u003e \nCountry of Manufacture: Japan\u003cbr\u003e \nCase: Soft case\u003cbr\u003e \nAccessories: Arm wrench\u003cbr\u003e \nWeight: 3.14 kg\u003cbr\u003e \nTruss Rod: No issues; rod movement confirmed up to 60 degrees on both sides with no problems\u003cbr\u003e \nRemaining Fret Life: Within normal range; fret height is sufficient for playing\u003cbr\u003e \nString Height (Low String Side): 2.0 mm at the 12th fret\u003cbr\u003e \nString Action (Treble Side): 1.5 mm at the 12th fret\u003cbr\u003e \nNut width: 41.3 mm\u003cbr\u003e \nNeck Shape: \"U\" Shape\u003cbr\u003e \nNeck thickness near the 1st fret: 21.2 mm\u003cbr\u003e \nNeck thickness near the 12th fret: 23.5 mm\u003cbr\u003e \nScale: 610 mm (24\")\u003cbr\u003e \nRadius: 254 mm (10\")\u003cbr\u003e \nStrings at Setup: ERNIE BALL 2223 \/ .009-.042 set\u003cbr\u003e \nRepairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, nut slot correction\u003cbr\u003e\n\u003cbr\u003e \n* As this is a used item, please note that there may be scratches, dents, or other imperfections not visible in the photos or not listed here.\u003cbr\u003e\n\u003cbr\u003e \n* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.\u003cbr\u003e \nThese measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.\u003cbr\u003e\n\u003cbr\u003e \n* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.\u003cbr\u003e \nWe sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.","brand":"FENDER MADE IN JAPAN","offers":[{"title":"Default Title","offer_id":67733510062332,"sku":"08-2800005723120","price":112320.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2247\/6028\/files\/e4213e243da9497baffb3e0db8a3f167_202610137602644.jpg?v=1792149142","url":"https:\/\/intl.ishibashi.co.jp\/products\/08-2800005723120","provider":"Ishibashi Music Corporation. ","version":"1.0","type":"link"}