USED Orville by Gibson / LPS-FM MOD Vintage Sunburst [11]

We have a realistic flamed top bi-gib in stock, made in 1991!
We have determined from the serial number that it was made in 1991 by Terada Gakki.

Maple top is flame maple specification.
The laminate is "LPS-T", but this one is made of flame maple with proper thickness.

The rear PU cavity is connected to the top wood from the side, and there is no sign of any adhesive.
There are no pickguard marks, which is the best proof that this is an "LPS-FM".

The neck is not deep-jointed, as one would expect. The neck is not deep-jointed, which gives a clear impression.

Usually, Gibson PU is installed, but this one is replaced with "Mojotone".
There is no model name on the back, but the DC resistance is about 7.8k on the front side and 8.2k on the bridge, which is approximately vintage tone.

The capacitor has been replaced with "K40n-2a 0.022uF 400V".

Both escutcheons have been replaced, and the pegs have been replaced with Gotoh locking pegs.
The nut and front Vol knob have also been replaced.
Overall, there are scratches, dents, clear peeling paint, and rust on the metal.
The paint is peeling around the 3rd string peg on the back of the head, and there are traces of glue that has peeled off, as if they wanted to repair it. The top of the head has some paint loss due to aging, and the paint is wrinkled vertically.
The neck condition is fine.
Overall, there are many dents and peeling paint, but they are not noticeable from the top and are commensurate with the age of the instrument.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: G111913
Case: Non-authentic gig bag
Weight: 3.94kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 22.5mm
Neck thickness near 12th fret: 24.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-head display. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
G111913

Case
Non-genuine gig bag

Weight
3.94kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
22.5mm

Neck thickness near 12th fret
24.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment