USED YAMAKI / YLP800CS Cherry Sunburst [11]

YAMAKI's excellent work that reproduces Les Paul style with a high degree of perfection
The "YAMAKI YLP800CS" was made around the 1980s, and its sound balance and careful construction can only be achieved by Japanese manufacture. The powerful mid-low range and extended sustain produced by the massive body are ideal for rock and blues playing. The glossy cherry sunburst finish and elegant binding are also impressive points.
The painted surface has beautiful weather checks, giving the guitar the character and presence of a guitar that has aged well. The finish appears to be lacquered, but the type of paint has not been confirmed in detail.
With its solid construction and presence of tone, this is a guitar that will respond to a wide range of players regardless of genre, and is one that you will want to keep for a long time.
There are scratches, dents, and dull parts.
The neck is in good playing condition.
It has a phase out sound when in the center position.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.31kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.0mm
SCALE: 628mm (24.75")
RADIUS: 432mm (17")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, paint removal from the top 6-string side of the head

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
4.31kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
23.0mm

Scale
628mm (24.75")

RADIUS
432mm (17")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, paint lift on head top 6th string end