USED Edwards / E-HR7-FX/BM Aqua Burst [11]

This 7-string model from Edwards combines a beautiful burl maple top with a mahogany back!
The top is made of burl maple veneer laminated to hard maple, with a deep and three-dimensional grain that creates a luxurious feel. The body thickness is slightly thicker at 47mm, which produces a rich mid-low range and a sustain sound. The paint finish takes advantage of the wood's texture, and its natural feel is one of its charms.
The neck is made of 3-piece hard maple, and the set-through construction with a boldly machined heel section provides outstanding high-fret access that approaches that of a through neck. The fingerboard is ebony, and side position marks are made of Luminlay, a luminescent material, for easy visibility.
The pickups are Seymour Duncan Sentient-7 (neck) and Nazg?l-7 (bridge), which can be used from clean to high gain. A fixed bridge by Hipshot and locking pegs by Gothoh are also included for stability and operability.
This is an ideal instrument for modern metal and progressive styles. This is a ready-to-play 7-string guitar that combines beautiful looks with real-world specs.
There is a paint crack on the first string side of the neck joint.
There are a few dents on the neck joint and body back, but they are not noticeable.
There are some minor scratches, but the guitar is in relatively clean condition.
The neck is slightly twisted (6-string side is bent forward, 1-string side is straight), but it has been set up and is in playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: ED1842676
Case: Non-authentic soft case
Weight: 3.19kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.1mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 48.0mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 22.0mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Repair and maintenance: Cleaning, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
ED1842676

Case
Non-genuine soft case

Weight
3.19kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.1mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
48.0mm

Neck thickness near 1st fret
22.0mm

Neck Thickness near 12th Fret
22.0mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Repair and maintenance
Cleaning, rod adjustment, octave adjustment, string height adjustment