USED K.Yairi / SBL-1A Vintage Sunburst [11]

K.Yairi SBL-1A, a high-quality acoustic guitar made by skilled Japanese craftsmen
The SBL-1A features rich resonance and powerful bass produced by its jumbo-sized body. The solid spruce top and Bolivian rosewood back and sides provide a deep, warm sound.
Yairi's original airy bracing balances the sound, and it can be used for a wide range of instruments, from delicate arpeggios to powerful strokes. This is one instrument that expands the range of your playing.
There is a crack near the top signature that has been repaired.
Overall, there are scratches and dents.
The frets have been set up after being worn out due to a dented fretboard.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: S0071
Country of manufacture: Japan
Case: Original hard case
Weight: 2.12kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.4mm above 12th fret
String height on treble string side: 2.1mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.7mm
SCALE: 648mm (25.5")
RADIUS: 406mm (16")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance: Cleaning, string replacement, rod adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
S0071

Country of manufacture
Japan

Case
Genuine hard case

Weight
2.12kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.4mm above 12th fret

String height on treble string side
2.1mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.7mm

Scale
648mm (25.5")

RADIUS
406mm (16")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment