USED Selva / Ignite Series SEG520S Pearl White [12]

We are pleased to announce the arrival of an extremely rare model of Selva, a brand produced by Ishibashi Musical Instruments!
The Selva series attracted attention around 1999 with its innovative design and functions as a new innovation for the next generation.
It was manufactured by Nakashin Rugaku, a company that had been involved in the production of Japanese-made Jackson/Charvel and other models.

The ST type dinky shape can be found in the used market, but this JG shape is a very rare model with only a few copies in circulation.

The aluminum pickguard, which characterizes the Ignite Series, is mounted with a FERNANDES SUSTAINER CD100F, Seymour Duncan SJBJ1-N, and DUNCAN TB-4.
The slim neck shape, similar to that of Jackson and Ibanez, and 17-inch fingerboard radius ensure technical performance.

The combination of SPARZEL locking tuners and Wilkinson VS-100N, the most popular hardware of the time, ensures smooth arming, stable tuning, and speedy string changes.

This model is rarely seen, so rare guitar lovers should not miss this opportunity!
Overall, there are some minor scratches and dings, but the guitar is in good condition with little signs of use.
The frets are low, but the playability is good.
The sustainer has been adjusted, but in harmonics mode, the low frets of the plain strings are a little weak, and when the trim is turned up, the wound strings transmit.
Please note that it is difficult to adjust the sustainer beyond the current state, so the sustainer is not covered by the warranty.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: 357
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.38kg
Truss Rod: Checked up to 60 degrees on both sides of the rod (not much left)
Fretboard: Still good for cutting, but the frets are low.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 22.0mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
357

Country of manufacture
Japan

Case
Non-genuine soft case

Accessories
Arm

Weight
3.38kg

Truss Rod
No problem, rod is checked up to 60 degrees to the left and right (not much left)

Fret remaining
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
42.2mm

Neck thickness near 1st fret
20.6mm

Neck thickness near 12th fret
22.0mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment