USED Paul Reed Smith (PRS) / Custom 24 2012 Makena Blue [12]

The beautiful Custom 24 in Makena Blue color is now in stock!
The Custom 24, the flagship model of PRS, has a normal top, but a flame maple top with solid wood from the center to the edge, finished in Makena Blue, reminiscent of coastal shallows.

The neck shape appears to be Pattern Shin, slim and suitable for technical playing.

The front pickups are original 59/09 BASS, but the rear pickups have been replaced with Seymour Duncan SH-4 (JB).

The 5-way selector allows for a variety of sounds, from a powerful humbucker sound, to a delicate single-coil half-tone, to a front single + rear humbucker, making this model suitable for all genres.
There are numerous small and large paint chips scattered throughout the head, and the wood at the tip of the head is slightly chipped.
There are numerous paint chips around the perimeter of the top of the body, especially near the end of the 6th string, and the back of the body has buckle scratches and numerous dents scattered throughout the body.
Some of the plating on the bridge saddle has peeled off, and there is a crack on the front pickup escutcheon.
The strap pins have been replaced with Jim Dunlop locking pins, but the strap side parts are missing.
Arm and bird tag are missing. It is very used, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 12 188829
Year of manufacture: 2012
Country of manufacture: USA
Case: Original hard case
Weight: 3.12kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 21.9mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
12 188829

Year of manufacture
2012

Country of manufacture
United States of America

Case
Genuine hard case

Weight
3.12kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.5mm

Neck thickness near 1st fret
20.9mm

Neck Thickness near 12th Fret
21.9mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair