Skip to product information
1 of 16

USED SCHECTER Schecter / Hellraiser C-1 AD-C-1-HR Black Cherry [20]

Serial Number : W19033097

[SN W19033097] USED SCHECTER Schecter / Hellraiser C-1 AD-C-1-HR Black Cherry [20]

Item Code: 20-2800005042795
Condition: USED
Store: [20] fukuoka

Regular price ¥102,960 JPY
Regular price Sale price ¥102,960 JPY
Sale Sold out
Shipping calculated at checkout.
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
The Hellraiser is renowned for its wide range of sound variation and playability.
Mahogany body and neck, set neck construction, and tappable EMG 89R & 81TW allow for a wider range of sound creation.
The combination of a thin neck shape and jumbo frets allows for not only heavy backing playing but also technical lead playing.
This bridge is a non-tremolo back-through specification.

There are some parts have some chinks and minor rust, and overall there are some signs of use such as line scratches and small dents.

After arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, and electrical repair (jack replacement)

Item rank : B+ (Good)

Year of manufacture : 2019
Truss Rod : There is plenty of room
Fretboard : 60-70%.
Accessories : soft case / non-genuine
Country of Origin : KOREA
Weight : 3.26kg
Serial : W19033097

Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Remaining: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.5mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (jack replacement)

* Please note that this is a used item and there are scratches, dents, and other damage that may not show up in the photos or are not shown in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
多彩なサウンドバリエーションと、プレイアビリティーの良さが定評のヘルレイザー。
マホガニーボディ&ネック、セットネック構造、タップ可能なEMG89R&81TWが搭載されより幅広いサウンドメイクが可能です。
薄めのネックシェイプにジャンボフレットの組み合わせでヘヴィなバッキングプレイのみならずテクニカルなリードプレイにも対応可能。
こちらのブリッジは、ノントレモロの裏通し仕様です。

パーツにクスミや細かいサビがあり、全体的に線傷や小さな打痕などの使用感がございます。

入荷後、クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理(ジャック交換)

商品ランク:B+ (良品)

製造年 : 2019年製
トラスロッド : 余裕有り
フレット : 60〜70%
付属品 : ソフトケース/非純正
生産国 : KOREA
重量 : 3.26kg
シリアル : W19033097

トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 問題なし充分なフレット高さあり
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 42.8mm
ネック厚1フレット付近: 20.5mm
ネック厚12フレット付近: 22.5mm
スケール: 648mm (25.5")
RADIUS: 356mm (14")
セットアップ時の弦: ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ・電装修理(ジャック交換)

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。
View full details

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 of 4