USED FENDER JAPAN / ST54-650 [03]

FENDER JAPAN ST54-650 in used condition.
Spring back panel is missing.

The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.

The guitar is in good condition and has been used for a number of years.
We also offer a 1-year warranty to ensure that you can use the instrument for a long time after purchase.

Serial number|H032601
Year of manufacture
Country of Manufacture|Japan
Case|Soft Case
Accessories|Arm
Weight|3.20kg
Truss Rod|No problem, rod is 60 degrees to the left and right, no problem
Fretboard: No problem, enough fretboard height
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.1mm
Neck thickness(near 1st fret)|20.2mm
Neck thickness (near 12th fret)|23.9mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Modified parts|-
Repair/Maintenance parts|Fret adjustment, cleaning, string change, rod adjustment, octave adjustment, string height adjustment
Others|Spring back panel missing
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: H032601
Country of manufacture: Japan
Case: Soft Case
Accessories: Arm
Weight: 3.20kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 23.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Fret adjustment, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Other: Spring back panel missing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
H032601

Country of manufacture
Japan

Case
Soft case

Accessories
Arm

Weight
3.20kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
23.9mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Fret adjustment, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

Miscellaneous
Spring back panel missing