跳至产品信息
1 / 13

Ibanez / BTB866SC-WKL Weathered Black Low Gloss(Weight:4.74kg) [05]

Serial Number : I230814805

[SN I230814805] Ibanez / BTB866SC-WKL Weathered Black Low Gloss(Weight:4.74kg) [05]

Item Code: 05-1M24RLP10-4805
Condition: NEW
Store: [05] shibuya

常规价格 $847.00 USD
常规价格 促销价 $847.00 USD
销售额 售罄
结账时计算的运费

If you cannot proceed to payment, please set the currency to a currency that can be used by PayPal, such as JPY, USD or EUR.

* CYN (China) and MYR (Malaysia) and KRW (Korea) are not available in PayPal.

If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
The single-cut BTB 6-string model was designed to achieve a rich sustain!

The BTB866SC is a 2022 model that inherits the concept of the BTB, but with a new sound and even easier playability. The BTB866SC has been significantly updated with new frets, fretboard and body material combinations, pickups and EQ, and a finger ramp.
Long sustain, rich resonance, and high rigidity with through-neck construction.
The 5-pc neck is made of maple and hard walnut for clarity and attack. The rigidity is reinforced by graphite rods installed inside the neck.
The through-neck construction provides long sustain and rich resonance, and the seamless feel of the neck back across the entire fret range is one of the greatest features of the BTB bass.
35" extra long scale adds sufficient tension and clarity in the low register for LOW-B.
Single-cut body with ash top, ocoume wood & ash wood laminated wings
The double-winged winged body sandwiches the neck and is made of a laminated structure combining ash wood, which has a clear and crisp sound, and okoume wood, which is rich in mid-range and low register characteristics. The 5th string side is a single-cut body with the body and neck jointed at the 12th fret, without a cutaway, in order to achieve the body's resonance and longer sustain.
The back side of the upper horn section has a scoop contour finish to improve accessibility.
Bartolini BH2 pickups
The Bartolini BH2 pickups feature a well-balanced warm response with a tight bottom end and rich midrange.
MR5 (monorail) bridge
Each string is independent of the other, and this bridge transmits the string vibration directly to the body.
Active 3-band EQ with 3-pattern mid-band frequency switch
This equalizer produces an active sound with a wide range and low noise, and the mid-range frequency can be switched between 250Hz, 450Hz, and 700Hz by toggling the switch. (006P battery powered)
Zero fretting for accurate intonation and minimal difference between open/pressed string sounds
Finger ramps for stable form and improved playability
Exclusively shaped, matte black color finger lamps are standard equipment. (already attached, not removable).
Stainless steel frets for bright sound quality and high durability
Neutrik jack with lock function to prevent plugs from falling out
D'Addario NYXL32130SL
S/N:I230814805
Weight: 4.74kg
Accessories:Accessories:Original gig case

Neck Type:BTB6 5pc Maple/Walnut neck with Graphite reinforcement rods
Body:Ash top / Ash / Okoume wing body
Fretboard:Rosewood fretboard w/Abalone dot inlay
Fret: Medium Stainless Steel frets
Number of frets:24 (+ zero fret)
Bridge:MR5 bridge (17mm string spacing)
Neck Pickup:Bartolini BH2 neck pickup
Bridge pickup:Bartolini BH2 bridge pickup
Equalizer:Ibanez Custom Electronics 3-band EQ w/3-way mid frequency switch
Hardware Color:Black
Strings gauge:.032/.045/.065/.80/.100/.130 (D'Addario NYXL32130SL)
Tuning:1C,2G,3D,4A,5E,6B
Scale:889mm/35"
Width at Nut:47mm
Width at Last Fret:76mm
Thickness at 1st:20mm
Thickness at 12th:22mm
Radius:400mmR

Specs

Neck Type
BTB6 5pc Maple/Walnut neck with Graphite reinforcement rods

Body
Ash top / Ash / Okoume wing body

Fretboard
Rosewood fretboard w/Abalone dot inlay

Fret
Medium Stainless Steel frets

Number of frets
24 (+ zero fret)

Bridge
MR5 bridge (17mm string spacing)

Neck Pickup
Bartolini BH2 neck pickup

Bridge Pickup
Bartolini BH2 bridge pickup

Equalizer
Ibanez Custom Electronics 3-band EQ w/3-way mid frequency switch

Hardware Color
Black

Strings gauge
.032/.045/.065/.80/.100/.130 (D'Addario NYXL32130SL)

Tuning
1C, 2G,3D,4A,5E,6B

Scale
889mm/35"

Width at Nut
Width at Last Fret

Width at Last Fret
Thickness at 1st

Thickness at 1st
Thickness at 1st

Thickness at 12th
Thickness at 12th

Radius
400mmR
ゆたかなサスティーンの獲得を目指した、シングル・カットのBTB6弦モデル!!

BTB866SCはそのコンセプトを受け継ぎ、さらに弾きやすく、サウンドも一新した2022年モデルです。フレットや指板材、ボディ材の組み合わせ、さらにピックアップとEQをも変更し、フィンガー・ランプも装備するなど大幅にアップデートしました。
ロング・サスティーン、豊かなレゾナンスに加え、高い剛性も兼ね備えたスルーネック構造
音像のクリアさとアタックに富むメイプル材と硬質なウォルナット材とを組み合わせた5pcネック。ネック内部に装備したグラファイト・ロッドによって剛性を強化しています。
スルーネック構造がもたらすロング・サスティーンと豊かなレゾナンス、そして全フレット域に渡るネック・バックのシームレスな演奏感は、BTBベースの最大の特長と言えるでしょう。
LOW-Bに充分なテンション感と低音域に明瞭さを加える35インチ・エクストラ・ロング・スケール
アッシュ材TOP、オコウメ材&アッシュ材の積層ウイング・シングルカット・ボディ
ネックをサンドする両翼のウイング・ボディは、ヌケが良くクリアなサウンド特性のアッシュ材と中低音域特性に富むオコウメ材とを組み合わせた積層構造です。 ボディの鳴り感とさらなるロング・サスティーンを狙い、5弦側はカッタウェイを設けず12フレット部分でボディとネックがジョイントするシングルカット・ボディです。
アッパーホーン部背面側には、アクセシビリティ向上を確保するスクープ・コンター加工を施しています。
Bartolini BH2 ピックアップ
タイトなボトム・エンドと豊かなミッドレンジとともに、バランスの良いウォームなレスポンスが特徴の、Bartolini BH2 ピックアップを搭載しています。
MR5(モノレール)ブリッジ
各弦が独立したブリッジで、弦振動をダイレクトにボディへと伝えます。
3パターンのミッド帯周波数切り替えスイッチを装備したアクティブ3-band EQ
ワイド・レンジ&低ノイズのアクティブ・サウンドを生み出すイコライザーで、スイッチの切り替えにより中音域の周波数帯を250Hz、450Hz、700Hzに切り替えることが可能です。(006P電池駆動)
イントネーションの正確さと開放/押弦サウンドの差異を最小限に抑える効果を期待できるゼロ・フレット
安定したフォームを実現し、演奏性の向上に役立つフィンガー・ランプ
専用形状、艶消しブラック・カラーのランプを標準装備しています。(貼付済、取り外しは出来ません)
ブライトな音質と高い耐久性が特徴のステンレス・フレット
プラグ抜け落ちを防止するロック機能付きのNeutrikジャック
D‘Addario NYXL32130SL
S/N:I230814805
重量:4.74kg
付属品:付属品:オリジナルギグケース

Neck Type:BTB6 5pc Maple/Walnut neck with Graphite reinforcement rods
Body:Ash top / Ash / Okoume wing body
Fretboard:Rosewood fretboard w/Abalone dot inlay
Fret:Medium Stainless Steel frets
Number of frets:24 (+ zero fret)
Bridge:MR5 bridge (17mm string spacing)
Neck Pickup:Bartolini BH2 neck pickup
Bridge Pickup:Bartolini BH2 bridge pickup
Equalizer:Ibanez Custom Electronics 3-band EQ w/3-way Mid frequency switch
Hardware Color:Black
Strings gauge:.032/.045/.065/.80/.100/.130 (D'Addario NYXL32130SL)
Tuning:1C, 2G,3D,4A,5E,6B
Scale:889mm/35"
Width at Nut:47mm
Width at Last Fret:76mm
Thickness at 1st:20mm
Thickness at 12th:22mm
Radius:400mmR

specs

Neck Type
BTB6 5pc Maple/Walnut neck with Graphite reinforcement rods

Body
Ash top / Ash / Okoume wing body

Fretboard
Rosewood fretboard w/Abalone dot inlay

Fret
Medium Stainless Steel frets

Number of frets
24 (+ zero fret)

Bridge
MR5 bridge (17mm string spacing)

Neck Pickup
Bartolini BH2 neck pickup

Bridge Pickup
Bartolini BH2 bridge pickup

Equalizer
Ibanez Custom Electronics 3-band EQ w/3-way Mid frequency switch

Hardware Color
Black

Strings gauge
.032/.045/.065/.80/.100/.130 (D'Addario NYXL32130SL)

Tuning
1C, 2G,3D,4A,5E,6B

Scale
889mm/35"

Width at Nut
47mm

Width at Last Fret
76mm

Thickness at 1st
20mm

Thickness at 12th
22mm

Radius
400mmR

Payment and Shiping

Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.

Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.

查看完整详细信息
No reviews

Please Note

All items we sell are USED and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 / 4