USED Paul Reed Smith (PRS) / SE Custom24 Quilt Limited Blue Matteo [05]

This is the "SE Custom24" from the PRS SE series, a classic with outstanding cost performance.
This instrument is one of the limited model with a quilt maple top.
Quilt maple, which is not found on the regular SE model, is used for the top material.
The body, neck, and head are each trimmed with cell binding, and the matching head design adds to the high-end feel.
The appeal of this model is that it has both a crystal-clear, crisp tone on clean, and a modern tone with a sense of power on both the low end and high end of the drive.
The smooth arming of the PRS-designed tremolo and other Paul Reed Smith features and ideas are incorporated in abundance in this instrument.
It is also equipped with a coil tap, making it possible to create a wide variety of sounds.

The control knobs have been replaced.
There are some signs of use such as picking scratches.

Item rank : B+ (Good)

Year of manufacture : 2019
Truss Rod : There is plenty of room
Fretboard : 60-70%.
Accessories : Soft case / Genuine tremolo arm
Weight ： 3.59kg
Serial : T02742

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.7mm
Neck thickness(near 1st fret)|20.9mm
Neck thickness (near 12th fret)|23.4mm
SCALE|635mm (25")
RADIUS|241mm (9.5")
Strings at setup|10-46set gari
Repair/Maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
Others|Front PU: G&B SP-8515-BNU Rear PU: G&B SP-8515-TNU

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.7mm

Neck Thickness (near 1st fret)
20.9mm

Neck Thickness (near 12th fret)
23.4mm

Scale
635mm (25")

RADIUS
241mm (9.5")

Strings at setup
10-46set gari

Repair and maintenance parts
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

Others
Front PU: G&B SP-8515-BNU Rear PU: G&B SP-8515-TNU