USED Fender / Modern Player Marauder Black [3.48kg / 2011]

Fender modern player Marauder with triple coil PU & single PU, made in 2011.

Fender USA produced (Made in China) Marauder. Koto (KOTO) body, Maple neck, Rose fretboard, Jazzmaster PU & Triple Coil PU, 5-way selector for JM Single/JM Single + Triplebacker Single (half tone)/Triplebacker Single/Triplebackerx3 (hum Triplebacker single/Triplebackerx3(hum)/Triplebackerx2(hum).

Marauder" existed as a prototype in the 60's. This model boasts a wide variety of sound variations.

The arm is not genuine, and shows signs of use (paint cracks on both sides of the body neck pocket, color fading, scratches, scuffs and scuffs, picking marks, fogging, bits and rust on metal parts and screws, and other exterior damage).

The low fret board has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment) upon arrival, and the truss rod has been checked to 60 degrees left and right.

* The truss rod has been checked to 60 degrees left and right and is in good condition (tight).
* Please note that there are scratches, dents, and other blemishes that may not show up in the photos. Please understand it beforehand.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: CGF1120825
Year of manufacture: 2011
Country of manufacture: China
Case: Soft case
Accessories: Arm
Weight: 3.48kg
Truss Rod: With caution, rod is checked up to 60 degrees to the left and right, no problem (not much left)
Fretboard: With caution, still can be cut, but the frets are low.
Nut Width: 42.0mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 23.4mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or other blemishes not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Item rank B+: Some scratches, but no problem in normal use.

Serial number CGF1120825

Year of manufacture 2011

Country of manufactureChina

CaseSoft case

AccessoriesArm

Weight3.48kg

Truss RodCaution: No problems with the truss rod, which has been checked up to 60 degrees to the left and right (not much left).

Fret remainderCaution: Still can withstand cutting, but the frets are low.

Nut width 42.0mm

Neck thickness: 21.2mm near the 1st fret

Neck thickness: 23.4mm near 12th fret

SCALE 648mm (25.5")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment