USED Ovation / 1767 Legend Sunburst [11]

This American-made Ovation deep bowl body, cutaway model is in stock.
Constructed with Sitka spruce top and ebony fingerboard. Equipped with OP24 preamp for easy and versatile sound creation.

There was a crack at the end of the 6th string side, so it was reinforced with glue.
There is a bulge on the top of the body.
There are some scratches and dings, but there are no noticeable damages.
The neck is slightly twisted and wavy, but there are no problems with the playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 446152
Country of manufacture: USA
Case: Original hard case
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height on bass side: 2.2mm above 12th fret
String height on treble string side: 2.2mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 22.8mm
SCALE: 648mm (25.3")
RADIUS: 254mm (10")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, alignment, and correction of the crack at the 6th string end.

Specs: D'Addario EJ-16 / .012-.053 set

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
446152

Country of manufacture
United States of America

Case
Genuine hard case

Truss Rod
No problem, rod is confirmed to 60 degrees left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.2mm above 12th fret

String height on treble string side
2.2mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
22.8mm

Scale
648mm (25.3")

RADIUS
254mm (10")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, alignment, correction of crack at the end of the 6th string side