USED Greco / SE800 3-Tone Sunburst [11]

Greco "Super Sound" series 1976 SE800 is in stock!
The SE800 is one of the top models in the series and mimics Fender's 1954 Stratocaster.
Shearer pegs (probably replaced from the original). 6-point synchronized tremolo.
Controls consist of 5-way pickguard selector, 1 volume and 2 tone.
(Judging from the model number and specifications, it is believed to be an SE800.)

There are many signs of use such as scratches, dents, paint chips, and cracks throughout.
Pot, selector, jack, and capacitor have all been replaced.
The pickguard has been replaced, but one hole near the center tone knob cannot be screwed in due to the overlap between the counterbore and the screw hole, so the hole remains open.
Paint is deteriorated, metal parts are rusty and dull, pickguard is scratched from playing, back panel is missing and joint plate is scratched.
There are many cracks on the side/end of the body, and a ding on the tip of the head.
There are traces of scraped paint from the side to the end near the bridge on the 6th string side of the body.
There is no noticeable abnormality on the neck, and there is no problem in playing condition.

All the pulls of the zipper part of the case that comes with the guitar are missing and have been repaired with a bandage.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: H764513
Year of manufacture: 1976
Country of manufacture: Japan
Case: Soft case
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem.
Fret Depth: Still good for cutting, but low frets.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 19.1mm
Neck thickness near 12th fret: 23.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial number
H764513

Year of manufacture
1976

Country of manufacture
Japan

Case
Soft case

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right

Fret Remaining
Still good for cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
41.2mm

Neck thickness near 1st fret
19.1mm

Neck thickness near 12th fret
23.2mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment