USED Epiphone / EB-3 Cherry [11]

Epiphone 1999 Made in Japan SG Bass "EB-3" is in stock!
This is a very rare Japanese model that was probably produced by Fujigen or Terada Gakki.
The front pickup has a large humbucker for heavy bass and the rear pickup has a bright and clear tone that can be switched to create a wide variety of sounds.

The pickups have been replaced with Allparts set pots made by Alpha.
The wiring has been reproduced based on the original Gibson EB-3 Series 1 with the following specifications.
Front with filter on
Front and Rear with filter on
3. rear
Front with filter off

This is a highly finished instrument with the careful construction and stable playability that can only be achieved by Japanese manufacture.
There are scratches, dents, peeling paint, and color loss.
There are some age-related deterioration such as rust and tarnishing on metal parts.
There are two holes where the bridge fence may have been attached.
There are paint chips, scratches, and dents on the head.
There are some dents, paint peeling, discoloration, and color loss, but it has a cool vintage look and feel.

The neck is rippled, and the low frets are warped and high.
When the rod is tightened, there is a sound jamming from the release to the low frets, so the current standard string height is not high enough.
There is no chattering or jamming, and there are no problems with the playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 902290
Year of manufacture: 1999
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.62kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard: No problem, sufficient fretboard height.
String height on bass string side: 3.0mm above 12th fret
String height on treble string side: 2.5mm above 12th fret
Nut width: 44.5mm
Neck thickness near 1st fret: 23.7mm
Neck thickness near 12th fret: 25.0mm
SCALE: 770mm (30.31")
RADIUS: 305mm (12")
Strings in setup: D'Addario / .045-.100 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.