USED Fender Japan / PB-STD/R Black [11]

The standard Precision Bass model PB-STD/R is now in stock from Fender Japan, a Japanese manufacturer.
Based on the simple PB style, this model is easy to handle and reliable.
The body is made of basswood for easy handling, and the maple neck and rosewood fingerboard combine to provide a core low frequency range and smooth fingering. The split-coil PU on the instrument brings out the fatness and presence that is typical of Plebe, and it can be used in all genres, from rock to pop to R&B.
The carefully crafted Japanese-style construction is also appealing, with emphasis on practicality in the neck fit and fretwork. The simple 1Vol / 1Tone control is easy to use, and is recommended not only as a first PB, but also as a sub-bass for immediate use.
This is an easy-to-handle, well-balanced instrument with the solid quality that is typical of Fender Japan. This is a must have for those who are looking for a practical instrument that can be played easily.
There are some marks on the body where the bridge has been replaced, and the paint is uneven around the body.
Overall, there are scratches, dents, and rust on the metal.
The neck is a little high, and the frets have been adjusted to accommodate this. The high frets have a raw sound, but the amp output is acceptable with no particular problems.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: T 04 4782
Country of manufacture: Japan
Case: Original soft case
Weight: 4.30 kg
Truss Rod: No problem, but I have checked the rod up to 60 degrees to the left and right (with high spring).
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 24.4mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.