USED Fender Japan / ST-CHAMP10 Large Head Vintage White [12]

Mini Strat with built-in speaker is now in stock.
This is a very rare large head version of the ST-Champ 10 that was manufactured and released in the 1990s.
The CBS logo, white/black/white 3-ply pickguard, and die-cast bridge saddle instead of pressed are also not to be missed.
The short scale makes it a good choice as an electric guitar for children.

This guitar has a slight buzz when turning the VOL knob when using an amp, but this is due to age.
This is due to age-related deterioration and should disappear when the knob is rotated to get used to it. There are some other minor scratches and yellowing of the paint due to aging, but the feeling of use is minimal and the condition is good.
It has been maintained and cleaned at our repair center and is in good playability.
The arm is missing.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: N068670
Year of manufacture: 1993-1994
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 2.97kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 22.1mm
Neck thickness near 12th fret: 23.9mm
SCALE: 610mm (24")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
N068670

Year of manufacture
1993-1994

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
2.97kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
22.1mm

Neck thickness near 12th fret
23.9mm

Scale
610mm (24")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair