USED Paul Reed Smith (PRS) / S2 Custom 24 Faded Gray Black Burst [12]

High cost performance model of PRS made in USA.
The S2 series is an upgraded version of the SE series, with the woodworking and assembly done in the U.S. factory, while the cost is reduced by OEM production of parts such as pegs, bridge, and pickups.
The S2 Custom24 is one of the most popular models in the SE series, with a striking body design that is different from the original, a 3-way blade switch and coil taps that produce a wide range of sounds and ease of operation, and other features that make it a top seller among guitars in the same price range.

The overall paint is cloudy, there are some minor scratches and dings, and the metal parts are tarnished.
The strap pin has been replaced with a Schaller locking pin, and the strap side parts are included.
The neck is slightly rippled due to slight signs of use, but all parts have been maintained and cleaned at our repair center, and playability is good.

Item Rank: B+: Some scratches, but no problem for normal use.

Serial number: 14 S200409
Year of manufacture: 2014
Country of manufacture: USA
Case: Original soft case
Accessories: Arm, wrench, strap lock
Weight: 3.21kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right (slight waviness)
Fret Depth: No problem, sufficient fret height
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.7mm
SCALE: 635mm (25")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial No.
14 S200409

Year of manufacture
2014

Country of manufacture
United States of America

Case
Genuine soft case

Accessories
Arm, wrench, strap lock

Weight
3.21kg

Truss Rod
No problem (slight waviness), confirmed up to 60 degrees left and right

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
23.7mm

Scale
635mm (25")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing