USED HAMER USA / Studio Natural [12]

Studio with a beautiful arched top is now in stock.
HAMER USA was used by many international artists in the 80's and 90's. From the certificate attached to the guitar, we have determined that it was manufactured between 1997 and 2007, when HAMER USA became a subsidiary of the Kamaan Company, which manufactured Ovation and other guitars.

One-piece mahogany back/figured maple top double cutaway body with mahogany neck/rosewood fingerboard set neck joint.

The pickups are Seymour Duncan SH-1N/B, featuring a classic humbucker sound.

With 2 volume/1 tone controls, each volume pot can be pulled up for coil tapping, which allows for a wide range of warm humbucker sounds to delicate single coil sounds.
Overall, there are numerous scratches and dings scattered throughout the instrument, but it is well-preserved considering its age of manufacture.
There are dents in several places on the neck grip, which may be uncomfortable for some players, but do not interfere with playability.
The neck grip is slightly worn, but has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 8 55972
Year of manufacture: 1997-2007
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate of Authenticity
Weight: 3.52kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 22.5mm
Neck thickness near 12th fret: 23.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning, wiring correction

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
8 55972

Year of manufacture
1997-2007

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Certificate of Authenticity

Weight
3.52kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.8mm

Neck thickness near 1st fret
22.5mm

Neck thickness near 12th fret
23.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning, wiring correction