USED Fender USA / American Vintage 72 Telecaster Custom Black [12]

A 2011 American Vintage 72 Telecaster Custom is now in stock.
The Telecaster head with F-KEY pegs has a black and gold-rimmed logo, a bullet nut that allows neck adjustment on the head side, a three-point bridge with micro-tilt, and other highly functional hardware.

The large pickguard and front pickups are equipped with humbuckers, and many specifications not found on previous Telecasters are employed, such as a pickup selector with a toggle switch and 2 volume/2 tone controls.

This model has the sharp sound of the rear pickup and the fat, warm sound of the front pickup, making it a highly practical model.
There are small and large paint peels on the top 6-string side edge of the body and the back 1-string side edge of the body.
There are many scratches and dents scattered throughout the body, and the paint film is discolored due to paint reaction.
The neck is in good condition, but the truss rod is loose, making it difficult to adjust the reverse bow.
The frets are low, but this does not affect the playing.
The strap pins have been replaced with Schaller locking pins, but the strap side parts are missing.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.
The hard case is slightly distorted, but this does not interfere with storage or transportation.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: V03862
Year of manufacture: 2011
Country of manufacture: USA
Case: Original hard case
Weight: 3.55kg
Truss Rod: No problem with the neck as it is now.
Fret Remaining: Need to consider replacing the frets at the next repair.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.9mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
V03862

Year of manufacture
2011

Country of manufacture
United States of America

Case
Genuine hard case

Weight
3.55kg

Truss Rod
Rod loosened and cut off, no problem with neck at present

Fret remainder
Need to consider replacing the frets at the next repair.

String Height Low String Side
2.0mm above 12th fret

High string height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
21.9mm

Neck thickness near 12th fret
23.1mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair