USED Fender Japan Fender Japan / TN72-85 Natural [20]

The TN72 model has a hollow construction that replicates the Telecaster Thinline circa 1972.
This model features a bread truss rod, two string guides, and a three-point neck joint.
Two wide-range humbuckers give it a thicker, slightly warmer sound.
It also has a light element due to its thinline construction, making it a good guitar for both ease of use and playability.
Scratches from age and use can be seen, and the back of the neck is dotted with shallow dents near the 12th fret.
The fingerboard surface also has scratches and dings from playing, but these are not scratches that would impair playability.
Although there are some minor scratches, the guitar is in relatively good condition for a guitar made before 2000.
The guitar has been fully maintained by our repair department since it arrived at our company, so it is in good playing condition.

There are some minor scratches, dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 1997-2000
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： Japan
Weight ： 3.64kg
Serial ： CIJ O083727

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42mm
Neck Thickness(near 1st fret)|21.9mm
Neck thickness (near 12th fret)|23.3mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|09-42set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42mm

Neck Thickness (near 1st fret)
21.9mm

Neck Thickness (near 12th fret)
23.3mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings at setup
09-42set

Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment