USED Orville Orville / SG-65 Heritage Cherry [20]

Orville was manufactured in Japan following the specifications of the original Gibson, and was highly regarded both in Japan and overseas.
Orville was a Japanese brand directly affiliated with Gibson, and was produced from the mid-1980s to the end of the 1990s.
This model is made in Japan with the aim of offering a high quality product at a low price, and is equipped with pickups made in Japan.
Mahogany body, mahogany neck, rosewood fingerboard. Controls are 2 volume, 2 tone, and 3-way switch.
The lightweight body allows stress-free playability and is recommended for female players.
The high quality made in Japan is also one of the easiest to handle as expected.

* There are scratches and dents throughout, although there are several dents with paint cracks on the corners of the body. There are some cracks on the control knobs and the top is peeled off.
The instrument has been maintained by our repair department since it arrived at our company, so you can use it with peace of mind.

Item rank: B+ (Good)

Year of manufacture: 1996
Truss rod: There is enough room.
Fret: 60-70%.
Attachment ： Soft case/not genuine
Country of Origin ： JAPAN
Weight ： 2.83kg
Serial ： J605078

Truss rod: No problem (not much left)
Fretboard: Still can withstand cutting, but the frets are low.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.9mm
Neck thickness(near 1st fret)|20.9mm
Neck thickness (near 12th fret)|23.1mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and gouge removal

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Fret Remaining
There is a note that the frets are low, but can still withstand cutting.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.9mm

Neck Thickness (near 1st fret)
20.9mm

Neck Thickness (near 12th fret)
23.1mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and gurgling removal