USED Squier by Fender Squier / Made in Japan CST-30S 3Tone Sunburst [20]

This is an E-Serial Japanese Squire CST-30.
The body and neck pocket stamps identify this as a CST-30.
The large head, bread adjusting rod, and current bridge are all original Fender features from the 1970's. The pickups are believed to be original SQ-3 single coils.
The pickups are original and are thought to be SQ-3 single coils.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed, and electrical repairs have been done, so it is in good playing condition.

The arm is missing.
There is a ding on the back neck on the 12th floor with a paint dent, and other overall scratches and dings.

Item rank: B+ (Good)

Year of manufacture: 1984-1987
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： JAPAN
Weight ： 3.41kg
Serial ： MIJ E649597

Truss Rod : No problem, rod is confirmed to be 60 degrees to the left and right.
Fretboard: Still good for cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|18.2mm
Neck thickness (near 12th fret)|21.1mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Note that the frets are low and can still withstand cutting.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.0mm

Neck Thickness (near 1st fret)
18.2mm

Neck Thickness (near 12th fret)
21.1mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair