USED Bill Lawrence Bill Lawrence / BCI-62 Custom CHALLENGER I Refinish MOD Green [20]

This Bill Lawrence guitar is styled after a standard Stratocaster.
This model has a rose fretboard, and the guitar has a slightly donkey tone with a strong bass resonance.
This guitar is popular as a quality middle-class guitar, and as it is a model that is not widely distributed nowadays, we recommend this guitar to those who are looking for an unusual and varied Strat model.

It has been refinished, and it appears to have been painted in-house rather than by a workshop or other means.
The paint is peeling off in some places due to the lack of adhesion between the body and the painted surface.

* After it arrived at our company, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repair have been done.
The neck has some torsion and waviness, and has been adjusted by fret adjustment.

The back plate and tremolo arm are missing.
There is rust on the parts. Overall, there are many scratches, dents, peeling paint, and discoloration, and there is a strong sense of use.

Item rank: B (average)

Truss rod: There is room to spare.
Fret: 60-70%.
Accessories: Soft case/not genuine
Country of Origin ： Japan
Weight ： 3.44kg
Serial ： B300957

Truss Rod: No problem, confirmed up to 60 degrees left and right (torsion and waviness)
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|20.1mm
Neck thickness (near 12th fret)|22.6mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.2mm

Neck Thickness (near 1st fret)
20.1mm

Neck Thickness (near 12th fret)
22.6mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair