USED Gibson USA Gibson / 1975 J-200 ARTIST Natural [20]

The Kalamazoo factory-made J-200 has a 17-inch body and is known as the "King of Flat Tops".
It is a very practical model with simple decorations and a dub-like bridge.
The fretboard inlays are beautiful, and the pickguard pattern and gold pegs give it an upscale look.
This model has a spruce top, maple sides and back, and a maple 3-piece neck with durable double X bracing.
The top vibrates differently and has a taut sound with attack.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised, so it is in good playing condition.

There are marks where the pickguard has been re-stretched in the past.
There are some weather checks mainly at the neck joint.
There are some parts that have some scratches and small dents, but considering the age of the guitar, it is in relatively good condition.

Item rank: B+ (Good)

Year of manufacture: 1975
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 2.42kg
Serial ： B005048

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|2.4mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|43.3mm
Neck thickness(near 1st fret)|21.3mm
Neck thickness(near 12th fret)|-
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings used for setup|D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.4mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
43.3mm

Neck Thickness (near 1st fret)
21.3mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing