USED Frank Harung Guitars / Embrace Worntage Classic Classic Teaburst [20]

Frank Hartung studied woodworking expertise in Germany and established his workshop in Lanwiesen, Germany in 2002. The flagship Embrace model.
It has an overall aged finish, deep-jointed set neck construction, and the heel of the neck is shaped for high position playability.
It is made with a very well-grained curly maple top, mahogany back body, mahogany neck and madacazcal rosewood fingerboard, and the truss rod adjustment point is made at 22F for a clean look.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised, so it is in good playing condition.

It has been originally aged and has some dents and feather checks.
The neck is in good condition with only minor scratches.

Item rank : B+ (Good)

Year of manufacture: 2017
Truss Rod : Plenty of room
Fretboard: 60-70%.
Accessories ： Hard case / Genuine spec sheet
Country of Origin ： Germany
Weight ： 3.54kg
Serial ： F259

Truss Rod : No problem, rod is 60 degrees to the left and right.
Fret height: No problem, fret height is high enough.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.4mm
Neck thickness(near 1st fret)|22.2mm
Neck thickness (near 12th fret)|22.8mm
SCALE|628mm (24.75")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.4mm

Neck Thickness (near 1st fret)
22.2mm

Neck Thickness (near 12th fret)
22.8mm

Scale
628mm (24.75")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing