USED Fender USA Fender / 1965 MUSTANG A-Neck White [20]

Neck Date: 8MAR65A, pot date 137-6528, 1965, Fender Mustang.
Pickups are original gray bobbins, Date is 1965.
* Rear PU is hard to see, but we judge it to be the same year because there is no solder or other tampered parts.
POT, switch, etc. are also original. The neck has been adjusted with one shim.
The case is also original case from that time (damaged).

The frets are dented and the fret height is quite low, but there is no sound jamming.
The pegs are not moving smoothly, but there is no problem with tuning.
The paint on the back of the neck is gone due to use, and there is some darkening.
The head logo is chipped and there is a ding on the corner of the head with a dent in the wood.
Overall, there are weather checks due to age, many paint chips throughout the body, and parts have a strong sense of use, such as chipping, rust, and peeling chrome.

After arrival, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment

Item rank: B+ (Good)

Year of manufacture: 1965
Truss rod : Plenty of room
Fretboard : Less than 50
Accessories ： Hard case / Genuine arm
Country of Origin ： USA
Weight ： 3.39kg
Serial ： 107844

Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Residue: Defective, need to consider replacement for next repair.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 37.9mm
Neck thickness near 1st fret: 19.1mm
Neck thickness near 12th fret: 23.7mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.