USED FENDER CUSTOM SHOP / 1952 Telecaster HB Relic 3Color Sunburst 2010 [03]

2010 Fender Custom Shop/1952 Telecaster HB Relic 3Color Sunburst is now in stock!

Based on the 1952 Telecaster, this model is equipped with a humbucker on the front in factory spec.
The model is based on the 1952 Telecaster and has a factory spec front humbucker. 2-piece ash body and maple neck with 52 Telecaster spec.
The neck shape is V-shape for easy gripping, and the fingerboard radius is 9.5R. 21 Dunlop 6105 frets are mounted.

The front and rear PUs are the original "SEYMOUR DUNCAN/SH-1n 59'" and "Custom Nocaster" respectively.
Controls are simple 1 volume and 1 tone.
The pickups are designed to reproduce the vintage humbucker sound, and the powerful Telecaster sound is different from the usual Telecaster sound.

The condition of the guitar is difficult to determine due to the original finish, but there are some scratches and scuff marks that may have been added later.
Also, the pegs have been changed from the original ones to locking type pegs made by SPERZEL.
Despite the replacement, the guitar is in good playing condition and looks cool.
This is a 52 Telecaster with humbuckers!
This is a rare one in the market, so please consider this opportunity!
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Neck Condition: No problem
Fret: 70-80%.
Case: Hard case
Accessories: Certificate, bridge cover, etc.
Serial number: R9740
Weight: 3.30kg

* Due to the nature of this product, we will not be able to show or move it to other Ishibashi Gakki stores. Please understand this in advance.
Please contact the Ochanomizu Main Store for further information.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial Number: R9740
Case: Hard Case

Weight: 3.30kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.8mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.8mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, grinding, removal of sticking screws x 2

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
R9740

Case
Hard case

Accessories

Weight
3.30kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.8mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
24.8mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, removal of sticking screws x 2