USED Taylor / 414ce Rosewood V-Class ES2 (Made in USA / 2020) Taylor Eleaco [08]

The 414ce Rose version features the revolutionary V-Class bracing!
Master builder Andy Powers' V-Class bracing construction dramatically improves volume and sustain control over traditional X-braced guitars. V-Class braced guitars improve intonation accuracy by controlling the top vibration (the top now vibrates at the same frequency as the strings) without the need to tamper with frets, nut, or saddle.

All solid Sitka spruce top, Indian rosewood side/back, mahogany neck, ebony fingerboard/bridge. The new V-Class bracing and the diagonal bracing on the back are also distinctive.

By using rosewood for the Side/Back, which is known for its tight bass and sparkling treble, the 414ce-R has specifications that will satisfy fans of acoustic guitars of yesteryear.
There are some signs of use (scratches, a few chip marks on the top, a pick scratch on the pickguard, a ding on the low position of the 6th string on the back of the neck, etc.), but you can use this 400 series, which is well known by Taylor, without any problems! If you are looking for a real acoustic guitar, please consider this one!

It has been set up (cleaning, string replacement, neck adjustment, and rubbing) upon arrival, and the fret board is in good condition with sufficient fret height, and the truss rod has been checked to 90° on the tightening side. * The bridge pins have been replaced with brass ones. Three originals are missing.
Final setup has been done at a well-known guitar workshop, including neck angle adjustment with original Taylor shims, fingerboard correction, and fret fret adjustment.

* This is a used item and is a one-of-a-kind used item.
* This is a used item, and there are scratches, dents, etc. from use that may not show up in the photos. Please understand it beforehand.

Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: 1207240042
Year of manufacture: 2020
Country of manufacture: USA
Case: Hard Case
Accessories: Manual, etc.
Truss Rod: Tightened to 90 degrees
Fret Depth: No problem, sufficient fret height
Nut width: 44.5mm
Scale: 647.7mm
Strings in setup: .012-.053 set
Modifications: Bridge pins
Repair/Maintenance: Cleaning, string changes, rod adjustment, and alignment
Top: Sitka Spruce
Sides & Back: Indian Rosewood
Neck: Tropical Mahogany
Fingerboard: Ebony
Bridge: Ebony
Pegs: Schaller Rotomatic
Finish: Gloss Finish

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and are subject to change due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
1207240042

Year of manufacture
2020

Country of manufacture
United States of America

Case
Hard Case

Accessories
Instruction Manual, etc.

Truss Rod
Up to 90 degrees on the tightening side

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.6mm above 12th fret

String height on treble string side
2.3mm above the 12th fret

Nut width
44.5mm

Scale
647.7mm

Strings for Setup
.012-.053 set

Modified part
Bridge Pin

Repair and Maintenance
Cleaning, string replacement, rod adjustment, and alignment

Top
Sitka spruce

Sides & Back
Indian rosewood

Neck
Tropical Mahogany

Fingerboard
Ebony

Bridge
Ebony

Pegs
Schaller Rotomatic

Finish
Gloss finish