USED Momose / MPJ Custom Order FL-Ash Trans Green [11]

Custom order based on Momose's PJ style bass MPJ.
This one has a trans-green color body made of ash, finished in lacquer and fretless. Only fret lines and side position marks, no position marks on the frets.
It has Momose's original shape headstock and is believed to be an MPJ series.
The unique sound of the fretless body is combined with the tight texture of the ash body. The finish has a peppiness that is rare for Momose, which is relatively easy to handle among Japanese-made basses, and is recommended not only for fretless players but also for those who want a bass with a different direction from the regular lineup.
The pickguard film is still attached except for the control area. The film near the controls has been neatly trimmed.
There is a scuff on the back contour as if from a belt, and a small scratch on the first fret on the 6th string side.
There are some scuffs and scratches, but overall the guitar is in clean condition with little signs of use.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 10442
Country of manufacture: Japan
Case: Original gig case
Weight: 4.14kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
String Height Bass String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 44.0mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.7mm
SCALE: 864mm (34")
RADIUS: 210mm (8.27")
Strings in setup: D'Addario ECB81 / .045-.100 set
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
10442

Country of manufacture
Japan

Case
Genuine gig case

Weight
4.14kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut Width
44.0mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
23.7mm

Scale
864mm (34")

RADIUS
210mm (8.27")

Strings for setup
D'Addario ECB81 / .045-.100 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment