Ibanez / BTB806MS-TGF Transparent Gray Flat Boutique Bass w/Multi Scale [03]

Through-neck construction for long sustain, rich resonance, and high rigidity.
The 5pc neck is made of maple and hard walnut for clarity of sound image and attack. The rigidity is reinforced by graphite rods installed inside the neck.
The through-neck construction provides long sustain and rich resonance, and the seamless feel of the neck back across the entire fret range is one of the BTB bass's most distinctive features.
6-string side: 37"~1-string side: 34.5" extra long multi-scale
The scale of the low-B string (6th string) is set at 37", which gives the low strings more tension than the standard BTB model, and this gives the bass more clarity and core sound when tuned down.
The multi-scale is the most extreme fan shape of all Ibanez basses, which is especially beneficial for technical fingering in the high fret range. (Note: Requires skill and familiarity and is not universal to all players and playing styles.)
Poplar burl top, ocoume wood & ash wood laminated wing body
The winged body, which sandwiches the neck, is made of a laminated structure with a top made of ash wood, which has a clear and bright sound, okoume wood, which is rich in mid and low frequency characteristics, and poplar wood with unique burl grain.
The deep cutaway style of the body contributes to the ease of playing in the high position, and the horn shape/design was designed for good balance when played standing up.
Ibanez T1 Pickups
This is a humbucker with two original separate coils, designed for a sound with tight response in the lower register, punchy midrange, and clear treble. The rounded cover edge is designed for easy finger placement, and the two pickups are slightly offset so that their ends are nearly parallel to the strings, providing a level of playability not found on other multi-scale models.
MR5S (monorail) bridge with string-to-string pitch adjustment mechanism
Each string has its own independent bridge, which transmits the string vibration directly to the body. The saddle is movable by ±1.5mm in the left/right direction, allowing the pitch between strings to be set freely within a certain range.
Active 3-band EQ with 3-pattern mid-band frequency switch and EQ bypass switch
This equalizer produces an active sound with a wide range and low noise, and the midrange frequency can be switched between 250Hz, 450Hz, and 700Hz by changing the switch.
It also has an EQ bypass switch that allows it to be used as a passive bass. (When bypassed: Tone control via Treble knob) (powered by 006P battery)
Zero fretting for accurate intonation and minimal difference between open/pressed string sounds
Stainless steel frets for bright sound quality and high durability
Neutrik jacks with locking mechanism to prevent plugs from falling out
Accessories: Exclusive hard-shell case (not for sale)
Serial number:I240309172
Weight(kg):5.05

Specs

Neck Type
BTB6 5pc Maple/Walnut neck-through w/Graphite reinforcement rods

Body
Poplar Burl top / Okoume /Ash wing body

Fretboard
Bound Panga Panga fretboard w/Abalone dot inlay

Fret
Medium Stainless Steel frets

Number of frets
24 (+ zero fret)

Bridge
MR5S bridge (17mm string spacing)

Neck Pickup
T1 neck pickup

Bridge pickup
T1 bridge pickup

Equalizer
Ibanez Custom Electronics 3-band EQ w/EQ bypass switch (passive tone control on treble pot) & 3-way mid frequency switch

Hardware Color
Black

Strings gauge
.030/.045/.055/.80/.100/.130 (D'Addario NYXL30130 for 37")

* A set of strings specially designed for multi-scale BTB models as interpreted by Bass Workshop.

Tuning
1C,2G,3D,4A,5E,6B

Neck Dimensions

Scale 5th ? 1st
939.8mm/37" ? 876.3mm/34.5"

a : Width at Nut
54mm

b : Width at Last Fret
88mm

c : Thickness at 1st
20mm

d : Thickness at 12th
22mm

Radius
950mmR