USED PEAVEY / Wolfgang Special Gold [03]

We are pleased to announce the arrival of a 1998 EVH Wolfgang Special Vintage Gold.

The Peavey EVH Wolfgang was produced from late 1996 to 2004.
This is an early model made at the Leakesville factory, featuring an 8-digit stamped serial number starting with 91, EVH's signature, and the "PAT.

Flat-top basswood body with an oil-finished maple neck made of pasted maple.
The pickups are Peavey's original zebra bobbin humbuckers.
It features a licensed Floyd Rose with D tuner and simple controls of 1Vol & toggle switch.

Condition.
Paint green rust, back panel and arm missing. Pickup selector replaced. Rear pickup has been rewound.
The bridge bridge frame for the first and second strings has been replaced, and a spacer has been inserted to increase the height of the bridge frame. There are some paint peeling, paint cracks, and scratches on the body of the D-Tuna unit and the area around the countertops.

There are also some scratches, dents, and paint cracks on the back of the neck, and it shows signs of use. There are also some parts that are dull, rusted, and scratched.

The neck, frets, truss rod, and other playing-related conditions are all in good condition.
The instrument has been fully adjusted and cleaned at our repair center upon arrival, so you can use it with confidence.

Serial number: 91009418
Year of manufacture: 1998
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories:Check sheet * Back panel missing, Arm missing
Weight:3.34kg
Truss Rod: No problem.
Fretboard: No problem, fretboard height is high enough.
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: cleaning, string change, rod adjustment, octave adjustment, string height adjustment

Product Rank: B: Fairly scratched and used, but no problem in normal use.
Item Rank: B: Fairly scratched and worn, but no problems with normal use.

Serial number: 91009418
Year of manufacture: 1998
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Check Sheet * Back Panel missing, Arm missing
Weight: 3.34kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Other: Back panel missing, Arm missing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
91009418

Year of manufacture
1998

Country of manufacture
USA

Case
Hard Case (Genuine)

Accessories
check sheet * missing back panel, missing arm

Weight
3.34kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Strings in setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

Other
Back panel missing, Arm missing