USED PAUL REED SMITH / 2012 Stripped 58 Custom Color Dot Inray Pattern Neck [03]

A used "Stripped 58" made in 2012 and marked Custom Color is in stock!
The vivid pastel turquoise blue color of this one jumps out at you.

Stripped 58
This model was produced in a limited edition at Experience PRS in 2011. It is a simplified version of the higher-end "SC58" model, but with no compromise in sound or playability. Neck binding and rosewood headstock veneers are omitted, but optional bird inlays are available, and the simple yet luxurious design is appealing.

Body, Neck, and Fingerboard
The body is a royal combination of flame maple top, mahogany back, and mahogany neck. The fingerboard is made of Indian rosewood.

Neck Shape
The neck shape is the "Pattern" shape, which is used on McCarty and other guitars.

Pickups
Two "57/08" pickups, which are inspired by the 1957 humbuckers, are equipped for the vintage sound of the PRS style, and use alnico 2 magnets for a modern and classic sound. The tone is very easy to handle.

The controls are 2Vol, 2Tone, and a 3-way toggle switch, a familiar control layout. There is no coil tap function.

The PRS has been loved by guitarists of various genres for many years, and you will be able to experience its maximum performance in various fields such as live performances, sessions, and recordings.

Condition
There are some wood chips on the head end, some parts are dull, and there are some minor scratches and dings.

The neck, frets, truss rod, and other parts are all in good playing condition.
The neck, frets, truss rod, etc. are all in good playing condition and have been fully adjusted and fretted at our repair center upon arrival.

Replacement parts
The strap pin had been replaced at the time of purchase, so we have replaced it with a genuine strap pin (new).

Product rank: B: Quite scratched and used, but no problem in normal use.
Item rank: B: Fairly scratched and used, but no problem in normal use.

Serial number: 12 194759
Year of manufacture: 2012
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Tags, Wrench, Manual
Weight: 3.94kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.8mm
Neck thickness near 1st fret: 23.1mm
Neck thickness near 12th fret: 24.4mm
SCALE: 622mm (24.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
12 194759

Year of manufacture
2012

Country of manufacture
USA

Case
Hard Case (Genuine)

Accessories
Tag, wrench, manual

Weight
3.94kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.8mm

Neck thickness near 1st fret
23.1mm

Neck thickness near 12th fret
24.4mm

Scale
622mm (24.5")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment