USED GIBSON CUSTOM / 1958 Les Paul Standard HRM [03]

The 2018 Gibson Custom Shop 1958 Les Paul Standard HRM is now in stock!

In 2018, Gibson Custom Shop took over a part of "True Historic" that had been manufactured until then and revived it as "Historic Collection" again with power-up.
This is one of the special ones using HRM (Hard Rock Maple), which has not been an option in recent years.

As mentioned above, the top material is Hard Rock Maple with beautifully raised grain, mahogany back, mahogany neck, and rosewood fingerboard.
The neck shape has a moderate thickness like a 58 Les Paul, and the grip is comfortable in the hand.
Weighing only 3.93 kg, it is also an attractive lightweight instrument.
The True Historic parts, which were thoroughly refined by collecting the original parts, are used, and the specifications are close to those of vintage Les Pauls down to the smallest detail, such as the all-nickel wiring.

The body color is a faded cherry sunburst, giving it a vintage look.
The original "Custombucker" pickups have been reproduced.

Two original "Custombucker" pickups are installed.
The vintage tone that reproduced Gibson's vintage pickups "PAF" has a tight bass, sticky midrange, and beautiful and extended treble, and it is an attractive sound that can be used even today.

The body has some dents and scratches, and some parts are dull and rusty.
Aniline dye stains can be seen on the binding.
Although there are some parts that show signs of use, the original color and paintwork combine to create a nice atmosphere.

This is one of the precious HRM specs!
Please take advantage of this opportunity!
Truss rod: There is room for tightening/loosening.
Neck condition: No problem
Fret: 70-80%.
Case: Genuine hard case
Accessories: Certificate, manual, tags, toggle switch metal plate
Serial number: 8 8173
Weight: 3.93 kg

* Due to the nature of this product, we are unable to move it between stores.

Item rank: B+: Some scratches, but no problem in normal use.

Serial number: 8 8173
Country of manufacture: USA
Case: Hard Case
Accessories: Certificate of Authenticity, Manual
Weight: 3.93kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 22.8mm
Neck thickness near 12th fret: 25.6mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 8 8173

Country of manufacture: U.S.A.

CaseHard case

AccessoriesCertificate, instruction manual

Weight3.93kg

No truss rod problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.0mm

Neck thickness 22.8mm near the 1st fret

Neck thickness near 12th fret: 25.6mm

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment