USED FENDER USA / The Strat Lake Placid Blue [03]

FENDER USA The Strat Lake Placid Blue is in used condition.

There are solder marks on the front and center pickups.
Rear pickup has been replaced (marked 194779).
The frets have been adjusted to match and the guitar is in good playing condition.

There are dents on the head, dings and scratches on the body, paint discoloration, and parts that are dull and have some signs of use, but this item has been cleaned, maintained, and set up by our repair department after we received it, and the strings have been replaced with new ones.

Item Rank: B: Fairly scratched and used, but no problem for normal use.

Serial Number: E022602
Year of manufacture: 1980
Country of manufacture: USA
Case: Hard Case
Accessories: Arms, Springs
Weight: 4.72kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 39.6mm
Neck thickness near 1st fret: 23.2mm
Neck thickness near 12th fret: 24.3mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modification: 2 strap pin screws
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, screw hole correction, and alignment

* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If there are descriptions of truss rod, remaining frets, or string height, they were measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number E022602

Year of manufacture1980

Country of manufacture USA

CaseHard case

AccessoriesArm, spring

Weight4.72kg

No truss rod problemNo truss rod problem.

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 39.6mm

Neck thickness near 1st fret 23.2mm

Neck thickness near 12th fret 24.3mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings in setup ERNIE BALL 2223 / .009-.042 set

Modified partStrap pin screws x 2

Repair/Maintenance partsCleaning, string change, rod adjustment, octave adjustment, string height adjustment, screw hole correction, mortise and tenon adjustment