USED Paul Reed Smith (PRS) / 2018 S2 Custom 22 Whale Blue Pattern Regular Neck [03]

The S2 Custom 22, a cost-effective model made in 2018 and produced at the USA Maryland Factory, as well as the Core model, is now available in pre-owned condition!

S2 Series
S2 stands for "Stevensville 2".
The name "S2" stands for "Stevensville 2." When this series was developed, it was decided that it should be marketed as a separate series from the CORE line, and an independent production line (2nd Line) was set up in the Maryland workshop (Stevensville), hence the name.

The series has simplified the body shape, centralized the neck scale and shape, introduced a new finishing process, and combined newly developed hardware with that for the CORE line to achieve greater efficiency in the body of the guitar and options.

Body, Neck, and Fingerboard
Wood materials include beveled flame maple top, mahogany back, and mahogany neck. Rosewood is used for the fingerboard.

Neck Shape
The neck shape is "Pattren Regular". It is moderately thick and has a grippy feeling.

Pickups
85/15 "S" pickups are equipped. Coil tap is available by pulling tone knob.
Condition
There is a chip on the tip of the head, as well as many minor scratches and dings.

The neck, frets, and truss rod are all in good playing condition.
The neck, frets, truss rod, etc. are all in good playing condition, and have been fully adjusted and fretted at our repair center upon arrival.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 18 S2028696
Year of manufacture: 2018
Country of manufacture: USA
Case: Hard case (not genuine)
Included: Arm
Weight: 3.34kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, wiring correction

* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problem in normal use.

Serial number 18 S2028696

Year of manufacture 2018

Country of manufacture USA

CaseHard case (non-genuine)

AccessoriesArm

Weight3.34kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

SCALE635mm (25")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, wiring correction