USED GIBSON MONTANA / Orianthi SJ-200 Cherry [03]

A used GIBSON Orianthi SJ-200, a signature model of Australian guitarist Orianthi Panagaris, is in stock.
It was produced in Bozeman, Montana, USA in 2021.

The top is made of AAA Sitka spruce and the back and sides are made of flame maple backwood. It shows various expressions depending on the angle of lighting.
The Ebony fingerboard has a newly designed Lotus neck inlay, and the headstock features the O-mark, the symbol of Orianti, with mother-of-pearl inlay.
The LR Baggs™ Orianthi pickup system, custom voiced for the Orianthi, is mounted in the soundhole.

The sound is a pleasant one that can only be experienced with the SJ-200, which is made of high-quality maple.
It is characterized by a clear, bright, yet clearly separated and thick bass range. The warmth of the dry sound is worthy of the name "The King of the Flat Tops.

There are some minor scratches and dings, but there is no noticeable damage, and the instrument is relatively clean for a used instrument. The truss rod has approximately 60 degrees of leeway. The frets have been grated.
A genuine hard case is included.

Item rank: B
Truss rod: There is approximately 60 degrees of leeway in the direction of tightening.
Neck Condition: Good
Fretboard: 80%.
Case: Genuine hard case
Item Rank: B: Fairly scratched & used, but no problems in normal use

Serial Number: 21061008
Year of manufacture: 2021
Country of manufacture: USA
Case: Hard Case
Accessories: Certificate of Authenticity
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 1.8mm above 12th fret
Nut width: 43.81mm
Neck thickness near 1st fret: 20.62mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, and alignment

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there may be scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the product is sold out after you place an order.

* Please forgive us for not being able to move between stores due to the nature of the product.

Specs

Product rank B: Quite a bit, there is a sense of scratches & use, but no problem in the use of normal use

Serial number 21061008

Year of manufacture 2021

Country of manufacture USA

CaseHard case

AccessoriesCertificate

No truss rod problem.

Fret remainder no problem, there is enough fret height

String height 2.5mm above the 12th fret on the bass string side

String height 1.8mm above the 12th fret on the treble string side

Nut width 43.81mm

Neck thickness near the 1st fret 20.62mm

Scale 628mm (24.75")

RADIUS305mm (12")

Strings D'Addario EJ-16 / .012-.053 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, mortise and tenon