USED HEADWAY / ASKA Team Build HDSAKURA [03]

Used Headway/ASKA Team Build HDSAKURA made of Nagano cherry wood is in stock!

Headway is a highly acclaimed Japanese acoustic guitar brand.
This model is made by ASKA Team Build, a group of skilled craftsmen, and offers the beauty and warmth that can only be found in domestic wood.

The main specifications are solid Sitka spruce spruce top, solid cherry side back, African mahogany neck, and purpleheart fingerboard and bridge.
Semi-forward-shifted, non-scalloped X-bracing construction provides a core sound.
It has a slightly thicker C-shaped neck with a nut width of 43mm and a scale of 644mm.
L.R. Baggs / Lyric has been retrofitted, so it can also be used as an electric acoustic guitar.

The condition of the guitar has some dents, scratches, and dull metal parts, and it shows signs of aging and use commensurate with its age.
There is a slight bulge below the top bridge.
The neck is almost straight and not high. The truss rod has been checked to 60 degrees left and right.
The frets are approximately 70% full. The string height is 2.5mm on the 6th string and 2.1mm on the 1st string above the 12th fret.
There are no electrical problems and the output is good.
A genuine hard case is included.

This is a very tasteful piece with the charm of domestic material and domestic brand.

Please consider it as soon as possible!

Specification

Top: Solid Sitka Spruce
Side & Back: Solid Sakura
Neck：African Mahogany 1p
Fingerboard & Bridge: Purpleheart
Condition B+: There are dents, scratches, and dull metal parts.
Serial number: A01048
Neck Condition: In good condition, truss rod has been checked to 60 degrees left and right.
The frets have been adjusted and are about 70% high.
Case and accessories: Genuine hard case, genuine hex wrench

Country of manufacture: Japan
Repair and parts replacement history: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Strings at setup: D'Addario EJ-16 / .012-.053 set

Item rank: B+: Some scratches, but no problems in normal use

Serial number: A01048
Country of manufacture: Japan
Case: Hard Case
Accessories: Genuine hexagonal wrench
Weight: 2.23kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.1mm above 12th fret
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts: cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.