USED FENDER CUSTOM SHOP / 1960 Stratocaster NOS 3-Color Sunburst [03]

We’ve just received a used 2000 Fender Custom Shop 1960 Stratocaster NOS 3-Color Sunburst!

Based on the 1960 Strat, it features classic specifications such as an alder body, maple neck, and rosewood fingerboard.
The fingerboard features a slab-jointed construction and vintage-style narrow frets. The fingerboard radius is 7.25R.
The neck features a slim C-shape that fits comfortably in the hand.

The body features a "3-Color Sunburst" finish.

It is equipped with three original black-bobbin pickups (all with a resistance of approximately 5.5k).
This guitar delivers not only the bright high-end typical of a Stratocaster but also a solid output across the mid and low ranges, providing a sense of depth.
The controls feature a simple 5-way switch configuration with a master volume, front pickup tone, and middle pickup tone.

As for its condition, it shows significant signs of use overall, with paint cracks, chips, scratches, and dents.
There are several dents visible on the body and the back of the neck. The back of the body shows signs of general wear and scuffing.
There are also areas where the finish on the sides of the fingerboard has peeled off.
Additionally, the metal hardware has a dull finish, and there is some light dirt on the pickup covers and pickguard.
Although it shows significant signs of use, there are no issues with its playability.

Several set screws for the saddles and the screws securing the back panel of the body have been replaced from the originals.

This is a classic 1960 Stratocaster from the Custom Shop!
Please consider this opportunity!!
Truss rod: Loose in both tightening and loosening directions
Neck Condition: No issues
Frets: 60-70%
Case: Original hard case
Accessories: Certificate of Authenticity, manuals, tremolo arm, bridge cover, and more
Serial Number: R8182
Weight: 3.51 kg

* Please note that due to the nature of this product, we are unable to transfer it between stores.

Condition: B: Shows significant wear and signs of use, but is fully functional for normal use

Serial Number: R8182
Year of Manufacture: 2000
Country of Manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.51 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.57 mm
Neck thickness near the 1st fret: 20.16 mm
Neck thickness near the 12th fret: 22.89 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, leveling, nut adjustment, fret cleaning, installation of 6 back panel screws

* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This item is a one-of-a-kind product listed simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.