USED Fender / 1975 Stratocaster Hardtail Sunburst [03]

The Stratocaster, which has been in production since 1954, has been beloved by many players for decades.

The model we’ve just received is a 1975 Stratocaster featuring specifications distinct from those of the 1950s and 1960s, such as a large headstock, a truss rod accessible from the headstock, and a three-point neck joint.

This particular model is a hardtail version without a tremolo, and at 3.32 kg, it is
, making it exceptionally easy to handle.

The neck is made of one-piece maple, and the date stamp reads "x903 1552," indicating it was manufactured in 1975.
The body appears to be alder, based on the grain pattern.

It is equipped with three 1975-made pickups featuring flat pole pieces and gray bobbins.
Thanks to the hardtail design, the sound is crisp and clean, making it a perfect match for cutting and other styles.
It also pairs well with overdriven tones, producing a trebly, punchy rock sound.

Two of the pots are confirmed to be from 1974; although the date on one is obscured,
we have determined that all are original.
It also retains the 3-way selector switch.

The neck has been over-lacquered.
Overall, there are scratches, dents, paint wear, peeling, and a gouged area in the wood on the body next to the front pickup,
, all consistent with its age.

It has a vintage-like atmosphere that clearly shows it has been well-played,
and the sound is excellent.

It responds well to effects and produces a sparkling sound, making it a Stratocaster with a charm unique to this era.
Please consider taking advantage of this opportunity.

* Please note that due to the nature of the product, we are unable to transfer it between stores.
Truss rod: Checked up to 60 degrees in both directions; no issues
Neck condition: No issues
Frets: Approximately 50–60% remaining
Case: Non-original hard case
Accessories: None
Serial Number: 655560
Weight: 3.32 kg

Condition: B: Shows significant wear and signs of use, but is in good working order for normal use

Serial Number: 655560
Year of Manufacture: 1975
Country of Manufacture: USA
Case: Hard case
Weight: 3.31 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.55 mm
Neck thickness near the 1st fret: 21.87 mm
Neck thickness near the 12th fret: 22.94 mm
Scale: 648 mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, and scraping

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.

* This item is a one-of-a-kind piece currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.